CP

Chen's Power · BMS Real-Time Monitoring

CHENPOWER SMART BMS

USB-to-Serial Connection

No authorized serial port found: Click "Identify New Serial Port and Connect" and select the USB-to-Serial device in the browser popup.
Serial Port StatusDetecting serial port...
Port numbers are automatically detected and listed by the browser. For privacy reasons, the browser only returns the USB VID/PID, not the system-assigned COM port. Please refer to the browser permission popup for the correct COM port. Bluetooth serial ports and virtual serial ports cannot be accessed via web; please use a USB-to-serial adapter cable instead.
Security ContextHTTPS / Security
Browser SupportWeb Serial is available
Serial port authorized0
Link StatusNot Connected
Data received0 bytes / 0 frames
Recently reportedNone
Try opening0 times
Parameters115200· 8N1
If the serial port fails to open, click "Release Serial Port" first, then disconnect other serial tools or tabs and retry. No data during self-check usually indicates a baud rate mismatch or reversed TX/RX connections.
Recent connection history
No serial connection history yet: Click "Connect" or "Identify and Connect New Serial Port" to display recent success/failure/disconnection records with timestamps here for troubleshooting.
0.0%Let stand
Remaining Capacity0.0 Ah
Estimated Range0.0 h
Total Voltage0.00 V
V
Voltage
0.00V
Average0.000V · Pressure Difference0.000V
A
Current
0.0A
Power0W
°
Temperature TEMP
0.0°C
Highest0.0 °C
W
Power
0W
Today's Discharge0.00kWh

Real-time Single Cell ·--string

Single-cell battery icon · Auto-adapts to cell countLimit300string
Average Instance
-- V
Highest single unit
--
Lowest single
--
Maximum Pressure Differential
-- V
Over-limit unit
0 String
Sample Stream Count
--
No single-cell voltage reports received yet. This section will update in real time once the communication module is connected.

Health State of Health (SOH)

STATE OF HEALTH
98.2SOH %
Loop Count126/ 2000 times
Design Capacity80.0 Ah
Full Charge Capacity78.6Ah
Auto-balancing

Real-time Trends

Runtime:00:00:00
Record count:0
Status:Stopped
Data Source:Simulated data
Storage:Local Storage